Heaters

Product Details:

Coil heaters are an advance concept of thermal engineering has a construction similar to high watt density cartridge heaters. These heaters are also known as high performance tubular heaters. The basic construction of these heaters consists of compacted MgO, high temperature resistance wire and chrome Nickel Steel tube. These heaters can be constructed with or without built in thermocouples.

Additional Information:

• Production Capacity: 10000 units
• Delivery Time: 2 working days
• Packaging Details: Reuseable box

Product Details:

Ragatiya's Coil Type Nozzle Heaters are capable of performance under the most adverse conditions. Highly recommended for processing high temperature resins to eliminate premature failures due to burn out/ process material leakage.

Heat transfer is based on conduction as well as on radiation principle, which not only improves the thermal efficiency but easy to assemble on nozzles as no pressure on heating surface is essential. Even unskilled operator can fit the heater with no risk of failure of the heater.

Coil Type Nozzle Heaters are specially designed to prevent the failures of heaters against the leakage and contamination of plastic material at nozzle position. This heater can meet the higher temperature requirement prior to molding at nozzle position.

Additional Information:

• Production Capacity: 10000 units
• Delivery Time: 3-4 working days
• Packaging Details: highly secured box packed

Product Details:

Matching up with the ever increasing requirements of the customers our company is engaged in providing Coil Heaters

Additional Information:

• Production Capacity: 10000
• Delivery Time: 3-4 working days
• Packaging Details: Highly Secured Box Packed

Product Details:

Matching up with the ever increasing requirements of the customers our company is engaged in providing Sealed Nozzle Heaters

Additional Information:

• Production Capacity: 10000 units in a month
• Delivery Time: 2-3 working days
• Packaging Details: Highly Secured Box Packed

Product Details:

• Sheath material: SS
• Two standard tube diameters, 1.50 mm and 1.80mm (0.059â€?? & 0.07â€??)
• Faster Heat Transfer with flat cross section tube (1.30mm x 2.30mm)
• Staggered cold leads
• Robust Construction

ApplicationsPET Preform Moulds l Hot Runner Nozzles & Bushings l Thin Walled Container Moulds

Additional Information:

• Production Capacity: 10000 units in a month
• Delivery Time: 2 days
• Packaging Details: Highly secured box

Product Details:

Ragatiya's Coil Type Nozzle Heaters are capable of performance under the most adverse conditions. Highly recommended for processing high temperature resins to eliminate premature failures due to burn out/ process material leakage.

Heat transfer is based on conduction as well as on radiation principle, which not only improves the thermal efficiency but easy to assemble on nozzles as no pressure on heating surface is essential. Even unskilled operator can fit the heater with no risk of failure of the heater.

Coil Type Nozzle Heaters are specially designed to prevent the failures of heaters against the leakage and contamination of plastic material at nozzle position. This heater can meet the higher temperature requirement prior to molding at nozzle position.

Additional Information:

• Production Capacity: 10000 units in a month
• Delivery Time: 3-4 working days
• Packaging Details: Highly secured box packed

Product Details:

The Flexible Tubular heaters compress into the groove and provide excellent heat transfer. Straight lengths available Ex-Stock eliminate costly downtime associated with waiting for custom bent tubular heaters. Engineered with a robust design incorporating greater thermal mass, our Flexible Tubular Heater is user-formable with a flexible solid casing that stays in the groove, yet is easy to install.

Additional Information:

• Item Code: 8512
• Production Capacity: 10000 units
• Delivery Time: 2-3 Working Days
• Packaging Details: Wrapped in plastic stretch Foil and packed in reuseable box

Matching up with the ever increasing requirements of the customers our company is engaged in providing Cartridge Electric Heaters

Matching up with the ever increasing requirements of the customers our company is engaged in providing Hot Runner Coil Heater

Matching up with the ever increasing requirements of the customers our company is engaged in providing Coil And Casting Heaters

Matching up with the ever increasing requirements of the customers our company is engaged in providing Tubular Heaters

Matching up with the ever increasing requirements of the customers our company is engaged in providing Cartridge Heater

Matching up with the ever increasing requirements of the customers our company is engaged in providing Flexible Manifold heater for Hot runner system

Matching up with the ever increasing requirements of the customers our company is engaged in providing Tubular Heaters

Product Details:

Matching up with the ever increasing requirements of the customers our company is engaged in providing High Performance Nozzle Heater

Additional Information:

• Production Capacity: 10000 units in a month
• Delivery Time: 3-4 working days
• Packaging Details: highly secured box packed

Matching up with the ever increasing requirements of the customers our company is engaged in providing Hot Runner Coil Heater

Ragatiya's Coil Type Nozzle Heaters are capable of performance under the most adverse conditions. Highly recommended for processing high temperature resins to eliminate premature failures due to burn out/ process material leakage.

Heat transfer is based on conduction as well as on radiation principle, which not only improves the thermal efficiency but easy to assemble on nozzles as no pressure on heating surface is essential. Even unskilled operator can fit the heater with no risk of failure of the heater.

Coil Type Nozzle Heaters are specially designed to prevent the failures of heaters against the leakage and contamination of plastic material at nozzle position. This heater can meet the higher temperature requirement prior to molding at nozzle position.

Matching up with the ever increasing requirements of the customers our company is engaged in providing Flexible Heaters

Matching up with the ever increasing requirements of the customers our company is engaged in providing Flexible Mould Heater

Matching up with the ever increasing requirements of the customers our company is engaged in providing Flexible Manifold Heater

Matching up with the ever increasing requirements of the customers our company is engaged in providing Manifold Heater

Matching up with the ever increasing requirements of the customers our company is engaged in providing Flexible Heaters

Matching up with the ever increasing requirements of the customers our company is engaged in providing Hot Runner System

Product Details:

A thermocouple is a sensor for measuring temperature. It consists of two dissimilar metals, joined together at one end. When the junction of the two metals is heated or cooled a voltage is produced that can interpreted by a temperature controller, high limit or display device. There are two common constructions for these: Tube and Wire and Mineral Insulated. The tube and wire uses an empty stainless tube with a wire inside which has a welded tip incorporating the wire junction. This construction is typically used to 480ºC. The Mineral Insulated construction uses a highly compacted stainless sheath with solid conductors encased in magnesium oxide insulation. This construction offers a wider variety of diameters, allows for the sensors to be bent in the field and for temperatures to 1200ºC. These sensors are available is a huge range of physical packages with a variety of lead wire, housing, and mounting options.

Additional Information:

• Production Capacity: 10000 units in a month
• Delivery Time: 3-4 working days
• Packaging Details: Single piece packaging