Ragatiya Heaters
Virar West, Mumbai, Maharashtra
GST No. 27AGGPV1690R1ZF
TrustSEAL Verified
Call 0804763398360% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Heater Type | NOZZLE HEATER |
| Brand | Ragatiya Heaters |
| Material | SS316 |
| Usage/Application | Coil Type Nozzle Heaters are capable of performance under the most adverse conditions. Highly recomm |
| Shape | Round |
| Compatible Power | 750 Degree C / 1380 Degree F |
| Heater Material | SS316 |
| Features | Coil Type Nozzle Heaters are capable of performance under the most adverse conditions. Highly recom |
| Voltage | 12 to 440 volts |
| Temperature | 750 Degree C /1380 Degree F |
| Frequency | Greater or Equal to 5 amphere at 500V (DC) |
| Packaging Size | Any |
| Material Grade | SS316 |
| Packaging Type | box |
| Dielectric Strength | DC |
| Warranty | No |
| Leakage Current | Greater or Equal to 5 amphere at 500V (DC) |
| Diameter | Between 20mm to 50mm |
| Volume Density | 25.4mm - maximum |
| Water Maximum Test Pressure | no |
| Alloy | Stainless Steel |
| Weight | 25 W/sq. cm or 150 W/sq. inch |
| Corrosion Resistant | Greater or Equal to 5 amphere at 500V (DC) |
| Power Source | DC |
| Size | Size Watts Volts 20mm X 30mm 200 230 25mm X 25mm 250 240 25mm X 38mm 250 240 25mm X 50mm 330 240 25m |
| Country of Origin | Made in India |
Nozzle Heaters are capable of performance under the most adverse conditions. Highly recommended for processing high temperature resins to eliminate premature failures due to burn out/ process material leakage.
Heat transfer is based on conduction as well as on radiation principle, which not only improves the thermal efficiency but easy to assemble on nozzles as no pressure on heating surface is essential. Even unskilled operator can fit the heater with no risk of failure of the heater.
Coil Type Nozzle Heaters are specially designed to prevent the failures of heaters against the leakage and contamination of plastic material at nozzle position. This heater can meet the higher temperature requirement prior to molding at nozzle position.
Additional Information: